Description
Note: The maximum operating current of this battery is only about 1.5A, and cannot be used for unmanned aerial vehicles, model aircraft or power tools, and other products that require high current.
The connector is a Micro JST 1.25 plug, it can be used for the esp32 Arduino development board whose plug is 1.25mm
Specification:
Standard Voltage: 3.7V
Capacity: 1100mAh
Approx Weight: 19g
Dimensions(±2mm): 47 * 28 * 7.8 mm / 1.41 * 0.84 * 0.23inch(L*W*H)
Discharge Rate: 1C
Working Current: 1.5A
The maximum discharging current: 3C
Overcurrent Protection: 1.8-2.1A
Type of Connector: Micro JST 1.25
Standard Charging Method: Charge this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till its charging current ≦ 0.05C.
Package Including:
4 x 1100mAh 3.7V Lithium Rechargeable Batteries
MakerFocus 4pcs 3.7V 1100mAh Lithium Rechargeable Battery 1S 1C
Note – The maximum operating current of this 3.7v 1100mAh lipo battery is only about 1.5A, can not be used for unmanned aerial vehicles, model aircraft or power tools, and other products that require high current.
- Specification – Material: Lithium Rechargable Battery; Battery voltage: 3.7V; Capacity: 1100mAh; Discharge: 1C; Plug: Micro JST 1.25.
- Application – This 1S 1100mAh lipo battery can be used for the esp32 Arduino development board whose plug is 1.25mm.
- Standard Charging Method – Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till its charging current ≦ 0.05C.
- Dimension – 47 * 28 * 7.8mm / 1.41 * 0.84 * 0.23inch(L*W*H); Weight: 19g.
