PGFUN CNC 3D Touch Probe Upgraded XYZ Axis Anti-roll Edge Finder Waterproof 3D Measuring Sensor Kit with 6mm Shank &...

Amazon.com Price: $14.99$76.99 (as of 04/24/2024 05:25 PST- Details)

This 3 coordinate XYZ axis CNC probe is designed for wide DIY cnc applications, like fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing.( Tips: it’s developed for DIY application, not recommended for industrial use)
Main Specs: power: DC5-24V, NPN-NO wiring ( High-level IO signal output when powered and turns to Low-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: X- ±4mm/0.16 in, Y- ±4mm/ 0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
Application: theoretically it can work with MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept 3-port probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)

Description

This 3 coordinate XYZ axis CNC probe is designed for wide DIY cnc applications, like fast zero-point acquisitions, surface flatness acquisition, measuring workpiece geometries such as edges, holes, grooves, studs, angles and corners, workpiece scanning & digitizing.( Tips: it’s developed for DIY application, not recommended for industrial use)
Main Specs: power: DC5-24V, NPN-NO wiring ( High-level IO signal output when powered and turns to Low-level signal output when Triggered), repeatability accuracy: 0.01 mm/ 0.0004 in, feedrate: 50-200 mm/min, over travel protection distance: X- ±4mm/0.16 in, Y- ±4mm/ 0.16 in, Z- 2mm/ 0.08in, XY axis trigger force: 0.5-0.82N, Z axis trigger force: 2.7N. (Note: ensure the sensitivity of the tool setter is higher than this edge finder/trigger force less than 2.7N if working with a tool setter)
Application: theoretically it can work with MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC or any other CNC control software with a probing routine and a breakout board that will accept 3-port probe input. (contact your software, and controller manufacturer or lookup forums for probe wiring and connections)
Upgraded digitizing CNC Touch Probe: the probe uses high-quality electronics for true high measurement precision and high repeatability, the fine frosted black oxidized aluminum alloy with a flat surface anti-roll/non-round shaped design, which makes it looks great and protects the touch probe well from dropping. Besides, This tool can be converted to a tool setter by a tool setter base and flat tip.
Package Include: 3D touch probe x 1, cable x 2 m/ 6.5ft, allen wrench x 1, straight probe tip x 1, wire connector kit x 1 (to solve the lack of control board wiring ports and extend the wire ).

Additional information

Brand

Pattern Name

, , , , , ,

Manufacturer