Description
The Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instruction for working with the Raspberry Pi 4 in a more hardware-centric manner. While the Raspberry Pi isn’t typically considered a go-to for hardware projects, its I/O pins hold a lot of benefits that you can use for a variety of applications. This kit covers the basics like using LEDs, and Buttons while providing a solid set of parts for working with any other hardware I/O and the 40-pin header. In addition, we’ve included all the parts needed for getting the Raspberry Pi 4 up and running whether it’s on its own, or using a monitor (not included). The new 64GB MicroSD cards keep read/write commands running super fast, too.
Most of the contents of the kit rely on the use of the 2×20, 40-pin header, so we’ve included a special extender to allow you to plug in the ribbon cable while using the provided heatsink case. We’ve also included a Qwiic Shim for easily working with I2C based Qwiic boards with the Pi. No soldering is required for this kit!
Note: This variation includes the 4GB RAM option for the Raspberry Pi 4.
Includes:Raspberry Pi 4 Model B (4GB)
USB C Wall Adapter – 5.1V, 3A (Black)
USB Type C to Type C Cable – 1 Meter, 100W, USB 2.0
Aluminum Heatsink Case for Raspberry Pi 4 – Obsidian Black
SparkFun Qwiic SHIM for Raspberry Pi
Micro HDMI Cable – 3ft
Kingston Canvas Go! Plus 64GB MicroSD Card with Adapter
2 X 20 Pin Extended GPIO Header – 16mm/7.30mm
Jumper Wires Premium 6″ M/F – 10 Pack
Jumper Wires Standard 7″ M/M – 30 Pack
SparkFun USB Mini-B Cable – 6 Foot
Raspberry Pi GPIO Ribbon Cable – 40-pin, 6″
Resistor 330 Ohm 1/6 Watt PTH – 20 pack
Assorted LED (20 pack)
Multicolor Buttons (4 pack)
Breadboard — Full-Size (Bare)
SparkFun FTDI Basic Breakout – 3.3V
SparkFun Pi Wedge
Make sure this fitsby entering your model number.
The Raspberry Pi 4 Hardware Starter Kit provides a solid set of parts and instruction for working with the Raspberry Pi 4 in a more hardware-centric manner.
This kit covers the basics like using LEDs, and Buttons while providing a solid set of parts for working with any other hardware I/O and the 40-pin header.
The new 64GB MicroSD cards keep read/write commands running super fast, too.
We’ve also included a Qwiic Shim for easily working with I2C based Qwiic boards with the Pi.
Note: This variation includes the 4GB RAM option for the Raspberry Pi 4.
You must be logged in to post a comment.