SparkFun Thing Plus – STM32 – ARM® Cortex®-M4 32-bit RISC core – 1.8 V to 3.6 V Application Supply –...

Amazon.com Price: $32.50 (as of 03/18/2024 14:03 PST- Details)

STM32 General Features: ARM 32-bit Cortex-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, Frequency up to 168 MHz, Memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), DSP instructions
1 Mbyte of Flash memory; 192 Kbytes of SRAM including 64 Kbytes of CCM (core coupled memory) data RAM; Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories
Clock, reset and supply management: 1.8 V to 3.6 V application supply and I/Os, 32 kHz oscillator for RTC with calibration, Internal 32 kHz RC with calibration; Low-power operation: Sleep, Stop and Standby modes, VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

In Stock

Description

STM32 General Features: ARM 32-bit Cortex-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, Frequency As much as 168 MHz, Memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), DSP instructions
1 Mbyte of Flash memory; 192 Kbytes of SRAM including 64 Kbytes of CCM (core coupled memory) data RAM; Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories
Clock, reset and provide management: 1.8 V to 3.6 V application provide and I/Os, 32 kHz oscillator for RTC with calibration, Internal 32 kHz RC with calibration; Low-power operation: Sleep, Stop and Standby modes, VBAT provide for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
Debug mode: Serial wire debug (SWD) & JTAG interfaces, Cortex-M4 Embedded Trace Macrocell; Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY, USB 2.0 prime-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI, 10/one hundred Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
Specific Peripherals to be had on STM32 Thing Plus: UART bus, I2C Bus, SPI bus, As much as 15 Analog Inputs, Two Analog Outputs, 20 Digital I/O Pins, 14 PWM Capable, SDIO for microSD card Reinforce, JTAG Serial Wire Debug Reinforce, Power Choose, LiPo Charging Circuit, 3.3V Regulator, 128 Mbit SPI Flash Note: Does no longer come with headers.

Additional information

Brand

Manufacturer

Model

Height

Length

Weight

Width